首頁 > W series Anti-Slip Coating

Anti-Slip Coating (water-based)   This new composite material is composed of acrylic resin and a filler with high hardness. Upon drying and firming, it is characterized by superior adhesion, water and weather resistance, and durability. It is significantly cheaper than Epoxy flooring materials and does not exhibit the same shortcomings such as bulging when exposed to high moisture levels and lack of weather resistance when applied in outdoor areas. 【Properties】 1.Water-based product, non-harmful to humans, conforms to eco-friendly standards. 2.Exceptional internal resistance to reverse osmosis of floor surfaces. 3.Can be used as a single agent or in combination with anti-slip aggregate to achieve optimal wear and stress resistance effects. 【Uses】 Paths, parking lots, warehouses, factory buildings, commercial spaces. 【Method】 1.Remove old coatings, dust, and loose material from the construction surface and keep it dry. 2.Evenly apply 1-2 coats of oil-based primer curing agent or the floor paint diluted with water (1: 3) as a primer. 3.When the primer is completely dry, apply at least two thin coats of evenly mixed water-based (anti-slip) floor paint at 60-minute intervals. 【Reminders】 1.Fill and level depressions with reinforced cement mortar. Don’t apply the floor paint before the mortar is completely dry. For general floor purpose (pedestrian walkway, commercial space): After opening the barrel and mixing it evenly, directly apply thin coating 2.For optimal wear and stress resistance effects, mix anti-slip coating (liquid-based) evenly with anti-slip aggregate and apply 1 coat with a trowel (maximum thickness of 2mm). 3.Upon completion, allow a curing period of 3 days prior to use. Laundry detergent may be utilized to remove dirt from floor paint surfaces. 4.In the outdoor high temperature environment, when anti-slip coating (liquid-based) + anti-slip aggregate (1:1), 3~5% water can be added to improve the workability. Laundry detergent may be utilized to remove dirt from floor paint surfaces. 5.Avoid application on surfaces constantly soaked in hot water or oil. 【Packaging】 Anti-Slip Coating (water-based): 20kg / 5-gallon plastic drum. Anti-Slip Aggregate: 20kg / paper bag (10kg × 2 packages) 【Color】 Green, Gray. 【Coverage】 Around 26-33m² (8∼10 pings) / dried membrane thickness of around 0.5mm(Actual amounts should be determined based on the density and coarseness of surfaces and utilized construction methods). 【Coating tools】 Brush, roller or trowel. 【Construction preparation tools】 Anti-Slip Coating (water-based), empty bucket, gloves, brush, water scoop, long-handled roller, mixing stick. Actual construction cases: