J-3 Transparent Anti-Slip Coating

Product information:
1. Applicable environment: Can be used in arcades, corridors, bathrooms, stairs, washed terrazzo slopes, wooden plank roads, swimming pools, large format stickers, and other surfaces.
2. Applicable base: All kinds of tile, stone, washed terrazzo floor, terrazzo floor, glass fiber reinforced plastic, PVC, metal, glass, and wooden floor.
3. This product is a single-liquid oily composite coating (non-aggressive acid solution).
4. After drying, a fully transparent surface coating film remains with excellent anti-slip effect.
5. Can be used indoors and on outdoor, wet and slippery environments. 6. Coating maintains its effect. Touch-ups required to repair damaged areas in the future.
7. Color: Completely transparent.

Instructions for use:
1. Applying tools: Roller brush, paint tray, paper tape, gloves.
2. Clean the floor where the product will be applied to ensure it is oil-free, clean, and dry.
3. Before use: Mix the solution well.
4. Two coats are required; apply first horizontal, then the second coat vertical. Wait in between coats for the surface to dry (touch the non-stick surface with your fingers 10 to 20 minutes after the first coat to check).
5. After two coats, the surface should be dry in about one hour. If used indoors, allow the product to dry for 1-2 hours before being walked on. If the conditions are too humid or poorly ventilated, it might take longer to dry.
6. Coverage:
1 liter: 7 square meters (two coats); coverage depends on the flatness of the floor.
1 gallon: 15 square meters (two coats); coverage depends on the flatness of the floor.
　

Attention:
1. Ensure unused product is well sealed if being stored. Product can be kept for one year.
2. Do not use this product if the ambient temperature drops to below 10°C. 　

Package: 1 liter, 1 gallon.
Color: Transparent.
Ingredient: A composite coating made of transparent oily resin and glass powder.